Hornby R044 PASS CONTACT SWITCH ! Production Details Supplies the brief pulse of current that a point motor requires. Supplied with connecting wires.

Hornby R046 TWO-WAY LEVER SWITCH ! Production Details Designed to divert power from one circuit to another - eg. with R406 coloured light signals to switch from red to green and back again. It may also be used to switch power from one section of track to another and is the switch you use to operate turntable R070.

Hornby R047 ON-OFF LEVER SWITCH ! Production Details Conventional on/off switch for R618 double-isolating track. Supplied with connecting wires

Hornby R602 POWER CLIP ! Larger picture  Production Details Used for all electrical connections to the track. Can be easily connected to track and control unit track not incuded

Hornby R8012 HM 2000 ! Larger picture  Production Details A complete transformer and speed control unit with built-in control for two separate trains, extendable to four trains by adding slave control units (HM2000+). Power output is two Amps, with compensation to regularise speed under varying conditions of load. 'Positive off' rotary speed control cuts all power when the control knob is turned to Zero. Features include forward and reverse switch, plus LED indicators for mains supply and output power. Outputs include non-variable AC and DC power for point motors and other powered accessories.

Hornby R8013 HM2000+ L/HAND DC CONTROLLER ! Larger picture  Production Details HM2000+ controllers plug into the main power controller (HM2000) to increase the number of trains you can control at one time. Recommended maximum is two units, one plugged in on the left side of the main controller and one plugged in one the right, providing control for four trains in all.

Hornby R8013A HM2000+ R/HAND DC CONTROLLER ! Larger picture  Production Details HM2000+ controllers plug into the main power controller (HM2000) to increase the number of trains you can control at one time. Recommended maximum is two units, one plugged in on the left side of the main controller and one plugged in on the right, providing control for four trains in all. HM2000+ controllers have all the same control features as the HM2000 master unit.

Hornby R8014 POINT MOTOR ! Larger picture  Production Details Powerful solenoid point motor for new model Hornby points that have the sliding bar mechanism. May be mounted above or below the baseboard (requires Point Motor Housing R8015 for mounting above). Comes supplied with metal extension arm for mounting motor underneath the baseboard. Powered from the accessory power output on your controller (or other 16v AC supply). Requires 'passing contact' lever switch R044 (not included).

Hornby R8015 POINT MOTOR HOUSING (ADAPTOR BASE) ! Larger picture  Production Details Provides a base to mount Point Motor R8014 above the baseboard, with a model trackside hut to conceal it. Comes with variable extension arm that allows you to position the motor at different distances from the track, on either side of the point. The base of the housing may also be used to mount the motor under the baseboard.

Hornby C990 MULTI PURPOSE MAINS TO 12V TRANSFORMER Now Only ! Larger picture  Production Details Supplies 16v AC current to R965 Standard Train Controller. Comes fitted with 3m output lead.      RRP £12.50  SAVE  £5.51   XSET

Hornby R965 TRAIN CONTROLLER Now Only ! Larger picture  Production Details Controls the direction and speed of one locomotive. Input is 16v AC from the R964 mains transformer. Output is 0-12v DC to the track, plus non-variable 16v AC output for power-switched points, signals and other accessories. Supplied fitted with 760mm lead to Power Connecting Clip               RRP £15.25 SAVE £7.26 XSET

Hornby R070 TURNTABLE WITH MOTOR ! Larger picture  Production Details Diameter: 382mm The turntable is designed to operate with the Standard Train Controller R965. Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set). Your speed controller now controls the rotation of the turntable. If you are using an HM2000 or HM4000 controller, then the turntable must be powered from the uncontrolled DC output with an R047 Lever Switch, 'on-off', not from the speed controller output. The set includes eight access track sections and wiring. You can add and subtract access sections to suit your layout, up to a maximum of 14.