FLEX-I-FILE

Unlike Needle files, “Flex-I-File” automatically follows compound curves, contour changes, and fillets without leaving scratches or flat spots. This Starter Set is exactly what you need to get going on your hobby project!

Contents: 1 Anodized Aluminum Frame and 6 Assorted Abrasive Refill

Contents: Each Package Contains 6 Abrasive Tapes

Orange

280 grit

Flex-I-File’s Abrasive Tapes are made on Mylar Polyester backing making them flexible and durable. Tapes readily adapt to surface structures and follow inside and outside contours. Tapes also have the ability to thread through small openings, perfect for those hard to reach work areas.

F/F Refill Tapes

Contents: Each Package Contains 6 Abrasive Tapes

Beige

400 grit

F/F Refill Tapes

Contents: Each Package Contains 6 Abrasive Tapes

Red

600 grit

F/F Refill Tapes

Contents: Each Package Contains 6 Abrasive Tapes

	Black	150 grit
	Orange	280 grit
	Gray	320 grit
	Red	600 grit

Flex-i-File “3 In 1” Set is a collection of 3 Anodized Aluminum Frames and an assortment of abrasive tapes for the precise model miniaturist. When secured on the lightweight Anodized Aluminum Frame, abrasive tapes will bend and conform to your work surface without breaking. The winning combination of abrasive tapes with the tailored frame tool provides a delicate touch for hairline accuracy. Removes flash from plastic or metal casting, smooth’s, and polishes rough surfaces and seams. Tough yet flexible the refill abrasive tapes can be used on wet or dry applications.

Contents: 3 Anodized Aluminum Frames and 13 Assorted Abrasive Refill Tapes

Available in a handy 1/2” X 6” size with one end round and the other end sports the New Long Reach Angle. The Flex-Pad colours correspond with the familiar tape grit colours, providing consistency. Padded support provides evenly distributed pressure over board for finishing concave and convex surfaces without digging in or causing excessive scratching. This product is ideal for sanding and blending materials of dissimilar texture and hardness. Flex-Pads can be used for wet or dry applications

Black

150 grit

Available in a handy 1/2” X 6” size with one end round and the other end sports the New Long Reach Angle. The Flex-Pad colours correspond with the familiar tape grit colours, providing consistency. Padded support provides evenly distributed pressure over board for finishing concave and convex surfaces without digging in or causing excessive scratching. This product is ideal for sanding and blending materials of dissimilar texture and hardness. Flex-Pads can be used for wet or dry applications.

Orange

280 grit

Available in a handy 1/2” X 6” size with one end round and the other end sports the New Long Reach Angle. The Flex-Pad colours correspond with the familiar tape grit colours, providing consistency. Padded support provides evenly distributed pressure over board for finishing concave and convex surfaces without digging in or causing excessive scratching. This product is ideal for sanding and blending materials of dissimilar texture and hardness. Flex-Pads can be used for wet or dry applications.

Gray

320 grit

Available in a handy 1/2” X 6” size with one end round and the other end sports the New Long Reach Angle. The Flex-Pad colours correspond with the familiar tape grit colours, providing consistency. Padded support provides evenly distributed pressure over board for finishing concave and convex surfaces without digging in or causing excessive scratching. This product is ideal for sanding and blending materials of dissimilar texture and hardness. Flex-Pads can be used for wet or dry applications

Red

600 grit

The Touch-N-Flow Applicator is a light-weight, easy-to-handle tool for applying liquid solvent cements. This product is gravity fed allowing an exact application of solvent cement according to the angle it’s held at. The Touch-N-Flow has the ability to join seams with a single continuous application, apply micro-droplets with pin-point accuracy, and can reach into tight corners without runs or smears. Reduce solvent cement evaporation and accidental spillage by containing a useable amount of solvent cement in the Touch-N-Flow.

Save your brushes for painting, with Touch-n-Flow Applicators you can:

• Join seams with a continuous application - no stops to refill a brush.
• Apply a micro-droplet with pin-point accuracy.
• Reach into tight corners without runs or smears

This product has the ability to smooth and polish an array of modelling surfaces and seams including plastic, wood, or metal mediums.  This product can be used wet or dry and is reusable.  All grits contained in this package can be washed with soap and water for maximum performance.

Size: 3” X 4”

Contents: 1 Abrasive Sheet of each 150, 280, 320, 600 grit

Flex-Pads put a “New Angle” on modeling with improved versatility and convenience!  Made of flexible polyester abrasives and containing inner padded support the Flex-Pad provides evenly distributed pressure over irregular surfaces without digging in or scratching.  Triple-Grit Polisher/Finisher cleans and polishes in 3 easy steps.  All products contained within this kit work well on plastic, wood, metal, and painted surfaces.

• Ideal for sanding and blending materials of dissimilar texture and hardness
• Double Sided
• May be used wet or dry
• Reach into tight corners
• Clean Up Narrow Recesses
• Smooth delicate joints & small fillets

Contents: 5 Flex-Pads (one of each grit we offer)